Thank you! Question Sent!
Your Name *
Your Email *
Phone (Optional)
Your Question *
Click image to enlarge
Print Specifications Stock Check

LDS-1516 Series Shielded Power Choke

  • Low DCR, lower Core loss
  • Low Profile Package With Large Current Design
  • Magnetic Shielded Construction
  • Operating Temperature Up To 125°C
  • Halogn free

 * For standard product: Please select the quantity for each item you wish to order or receive a quote and click the 'Add To Quote' button below.
* For custom product: Please click 'Custom' button below. You will be directed to a page where you can add custom product information and attach prints.


  1. Inductance is measured at 100 KHz and 1.0 Vrms.
  2. The nominal DCR is measured at 25°C ambient temperature.
  3. The I-sat current at which the inductance value will be decreased by 30% from it’s initial value at 25°C ambient temperature.
  4. Temperature Rise Current that will cause temperature rise approximate 40°C without core loss. (Ta=25±5°C)




LDS Mechical Drawing
Unit: mm
14.8 max 15.8 max 5.0 ± 0.5 12 ± 1.0 See Electrical Table 12 ± 1.0 See Electrical Table


  1. Operating Temperature: -40°C ~ +125°C
  2. The part temperature (ambient + temp rise) should not exceed 125 °C under worst case operating conditions.



Typical Construction

Pocket Image 70PCS/TRAY
Package Inner box 700PCS/INNER BOX
Package Carton 1400PCS/CARTON


  1. Temperature and humidity conditions: Less than 40°C and 70% RH.
  2. Recommended products should be used within 6 months from the time of delivery.
  3. The packaging material should be kept where no chlorine or sulfur exists in the air.


  1. Products should be handled with care to avoid damage or contamination from perspiration and skin oils.
  2. Bulk handling should ensure that abrasion and mechanical shock are minimized.

This website uses cookies to ensure you get the best experience on our website. Learn More

Accept Cookie Policy